WHAT IS THE dipcoater (Dip Coating Equipment)?

It is the mechanism which forms a Thin Film by raising-up the specimen at low speed after dipping in the coating liquid.
HOME > Dip Coat System with Circulation Mechanism for Coating Liquid MD-1501-S1
The Product Details

Special order device

Dip Coat System with Circulation Mechanism for Coating Liquid MD-1501-S1

This device is the Dip Coater (Coating Device) available to apply the plural sheets of glass or metal materials at the same time which is considered for the Chemical Resistant Property. The measurements for PTFE coating and electrostatic are done with using PTFE material for the part of touching with the liquid. Exchanging the part of the Circulation Mechanism is available, therefore, it is the Dip Coating System with preparation plural parts of the Circulation Mechanisms, which can do Dip Coat with different coating liquid easily.

 
This is the Dip Coater (Coating Device) available to apply the plural sheets of glass or metal materials at the same time which is considered for the Chemical Resistant Property. PTFE material is used for connecting liquid part. The measurement for the issue of PTFE coat also electrostatic was done. To exchange the part of the Circulation Mechanism for the coating liquid is possible; therefore, it is the Dip Coating System with arranging plural parts of the Circulation Mechanisms, which can do Dip Coat with different coating liquid easily.

Main Specifications
Stroke 300mm
Minimum Speed (Min.) 1μm/sec
Maximum Speed (Max) 60mm/sec
Operating Method Through Touch Panel
Screen Indication Language Japanese or English
Number of designation points for Transaction Speeds 16 points
Number of designation points for Stop Positions 16 points
Number of designation points for Stopping Time 16 points
Consecutive Driving Mode Equipped
Manual Driving Mode Equipped
Number of Memorized Programs 8 programs
Monitoring Function: Present Speed Equipped
Monitoring Function: Present Position Equipped
Monitoring Function: Residual Time Equipped
Repetition Driving Equipped
Standard Clip Polypropylene (PP)
Utility AC100V,250VA
Weight Capacity 1kg
Maximum Processing Size (mm) H:300mm
Linear Driving Mode Not Equipped
Equipment Dimension (mm): not including projections W:700 D:546 H:1238
Control Box Dimension (mm) : not including projections W:300 D:285 H:163
go to pagetop