We are the expert in dipcoaters (Dip Coating Equipments) with Production / Supply / Maintenance. | SDI Company Ltd.

HOME > Summary of the Dip Coating System

Summary of the Dip Coating System

Process by the Dipping Method
It is the method of keeping a specimen vertically and dipping it into set Dip Coating Liquid, then raising-up from the liquid to upper portion and gelling of the attached liquid film in air (vapor phase).
  • 1.Dip
    1.Dip
  • 2.Raising-up
    2.Raising-up
  • 3.Coating
    3.Coating
  • 4.Thin Film Formation & Dryness
    4.Thin Film Formation & Dryness
Dipping a specimen into Dip Coating Liquid tub perpendicularly
Starting of raising-up with using mutual interaction of Viscous of Dip Coating Liquid, Surface Tension and Gravity.
The Raising-up Speed of specimens controls the thickness of the film, from relationship with the viscosity of the Dip Coating Liquid and the Gravity which flows down adhered liquid.
Completed to form uniformed thin film -- Dryness

Relations of Raising-up Speed and the Film thickness
It will control the film thickness by Raising-up Speed and the Solvent Consistency.
The slower speed of Raising-up will make the thinner Film,
  The higher speed of Raising-up will make the thicker Film.



Reference Data of Base Material Board Raising-up speed and Film Thickness
<1> Example of the Dip Coating for Glass Material Board dipping into the Solution of Titanium Oxide Precursor NDH-510C (NISSO)

* Source of Reference: Manufacture of the titanium oxide film used with Micro Dip Coater MD-0408-S2
Institute of Industrial Science, the University of Tokyo
Nobuyuki Sakai,Tetsu Tatsuma

<2> Example of the Film Thickness Distribution when Dip Coating of Photo-resist to Copper sheet

[The Raising-up Speed of Base Material Board Detail]

Points for the Film Thickness Measurement
<-Chuck Space for Base Material Board 4mm

{Raising-up Speed of Base Material Board : 15mm/sec..}
The Thickness of Base Material Board : t = 0.1 mm and 1.0 mm
Dimension of the Base Material Board : 510 mm x 510 mm
Measuring every 100 mm from A to F
Regarding at A & F, each 3 points every 5 mm were measured.


[Reference Data of the Film Thickness]

Thickness of Base Material Board Measuring Point
A B C D E F
5mm 10mm 15mm 5mm 10mm 15mm
Sample Board 0.1t
0.1t
Surface 9 9 9 11 11 11 11 11 10 10
Reverse 9 9 9 11 11 11 11 10 10 10
Sample Board 1.0t
1.0t
Surface 9 9 10 10 10 10 11 9 9 9
Reverse 9 9 9 11 11 11 11 10 10 10

Contact Us

You can send inquiries about our products, requests for materials, and all other inquiries and opinions from here.
Inquiry formGo to page top
Copyright (c) SDI Company .,LTD. All Rights Reserved.